Clare Controls ClareVision Guide d'installation télécharger pdf (Page 18)

14 ClareVision Network Video Recorder Installation Guide

PTZ control

Follow the procedure to set the parameters for the PTZ. You should configure the

PTZ parameters before you set the PTZ of the camera. Before you begin, ensure

the PTZ and the NVR are connected properly through the RS-485 interface.

PTZ settings

To set PTZ:

1. Enter the PTZ Settings interface (Menu > Camera > PTZ).

2. Choose the camera for PTZ setting next to the Camera label.

3. Enter the parameters for the PTZ camera.

Note: All the parameters should be the same as the PTZ camera parameters.

4. Click Copy to copy the settings from other PTZ cameras.

5. Click Apply to save and exit the interface.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Pas de commentaire

Clare Controls ClareVision Guide d'installation Page 18